 |
|
elefant® stair treads - type mesh gratings |
|||||||||
 Back |
Standard mesh stair treads
elefant mesh stair tread
Bolt holes, depth 150mm
Bolt holes, depth 250 mm
Bolt holes, depth 300 mm
School for Modern Dance, Copehagen
Special mesh stair tread with slip resistans front edge
Åholm School, Denmark
Åholm School, Denmark
Stair treads:
elefant® grating steps are used in stairways for residential, business and industrial buildings. They can be adapted for fitting in existing stairways or used for standard straight-run stairs.
elefant® grating steps are pressure welded type SP gratings with full height bearing bars in the bearing direction and filler and control bars of variable height at right angles to the bearing bars. Edge bar is welded around the gratings with bolt holes for fitting.
Dimension:
The elefant® grating steps are available in a number of standard sizes from 150x500 to 300x1500 mm but may also be made to order.
Mesh sizes:
Step gratings are supplied with standard mesh 20x30 mm. If a different mesh size is required, the grating must be custom-made.
Bearing bars:
20x2 mm
Edge bar:
50x3, 60x3 or 70x3.5 mm depending on the dimensioning.
Bolt holes:
elefant® grating steps are supplied with bolt holes for fitting as standard. The placing of the bolt holes appears from the drawings to the left.
Material:
Manufactured in steel S235JRG2 (steel 37-2) but can also be manufactured in other materials as requested.
Surface treatment:
The standard surface treatment of elefant® grating steps is hot-dip galvanising in accordance with DS/EN ISO 1461 1999 but they may be delivered with other surface treatments or in untreated form.
Available from stock:
Please see the stock list.
Special sizes:
Contact us for further information about possibilities and prices.
Note:
The correct dimensioning of grating steps depends on the application of the steps (industrial, fire escape etc.). Therefore we kindly ask you to state the desired application when enquiring/ordering.
elefant® grating steps are used in stairways for residential, business and industrial buildings. They can be adapted for fitting in existing stairways or used for standard straight-run stairs.
elefant® grating steps are pressure welded type SP gratings with full height bearing bars in the bearing direction and filler and control bars of variable height at right angles to the bearing bars. Edge bar is welded around the gratings with bolt holes for fitting.
Dimension:
The elefant® grating steps are available in a number of standard sizes from 150x500 to 300x1500 mm but may also be made to order.
Mesh sizes:
Step gratings are supplied with standard mesh 20x30 mm. If a different mesh size is required, the grating must be custom-made.
Bearing bars:
20x2 mm
Edge bar:
50x3, 60x3 or 70x3.5 mm depending on the dimensioning.
Bolt holes:
elefant® grating steps are supplied with bolt holes for fitting as standard. The placing of the bolt holes appears from the drawings to the left.
Material:
Manufactured in steel S235JRG2 (steel 37-2) but can also be manufactured in other materials as requested.
Surface treatment:
The standard surface treatment of elefant® grating steps is hot-dip galvanising in accordance with DS/EN ISO 1461 1999 but they may be delivered with other surface treatments or in untreated form.
Available from stock:
Please see the stock list.
Special sizes:
Contact us for further information about possibilities and prices.
Note:
The correct dimensioning of grating steps depends on the application of the steps (industrial, fire escape etc.). Therefore we kindly ask you to state the desired application when enquiring/ordering.