Fixing plates for mesh gratings

Back

General details:
ElefantRiste A/S operates with four universal fixing methods for our grating types SP, N or NP.

 

In addition, we can also supply fixing clips for clamping the gratings down.

 

Finally, we have developed special fitting methods for individual projects on several occasions in collaboration with clients, architects and consulting engineers.

 

Fixing plates:

Fitting plates are welded between the bearing bar and the edge bar 3 mm from the underside of the grating.
They are available with round or slotted bolt holes.

Fixing with bolt holes or notches in edge bar:

Elefant® gratings can be fastened using bolt holes or notches in the edge bar.

Close mesh fixing plate:

Welded fixing plate to underside or top side of grating with bars cut away to accommodate.

 

If a deeper edge bar is fitted, the fixing plate can be welded to the
underside with no bars cut away, thus providing a discrete fixing.

 

Bolt hole sizes:

The standard bolt hole sizes are: Round: Ø6, Ø8, Ø10, Ø12 mm Slotted: Ø9x15, Ø11x28, Ø14x28 mm
Other hole sizes can be made to order.