Fixings Methods for Mesh Gratings
General details:
Elefant Gratings operates with several fixing methods for our grating types. Welded Fixing Plates, Welded Cleats, Side Fixing Hole, Standard Clip Assembly.
Fixing plates:
Plates are welded within the grating generally between the bearing bars and subject to the mesh size will be located 3mm up from the underside or flush to the face side with a countersunk hole. Transverse bars are cut away to accomodate accordingly.
Fixing Cleats:
Welded plates or brackets to the edge perimeter - usually applied on balustrade/fencing type application.
Fixing Holes/Notches:
Holes within the edge bar to enable mechanical fixing through to support - usually applied on vertical applications and louvre grilles.
Bolt hole sizes:
The standard bolt hole sizes are:
Round: Ø6, Ø8, Ø10, Ø12 mm, Ø14mm
Slotted: Ø9x15, Ø11x28, Ø14x28 mm
Other hole sizes can be made to order.
Clip Assembly:
Standard saddle clip with bolt, underclamp & nut. - Only available for flooring application with mesh size of 20, 30, 40-50mm. See following section with illustrations.